Product Registration

Customer Login

Contact

Search:





ViaSat, Inc.




Jul 29, 2010









 Government Satcom: UHF Satcom


UHF Satcom Equipment

ViaSat is the world leader in DoD UHF mobile satellite networking, providing user terminals, modems, and simulators, as well as network gateways and infrastructure to the U.S. and ally military forces.

UHF Satcom Terminals

With ViaSat's RT-18XX family of UHF SatCom Terminals, you can choose a SatCom terminal that best matches your requirements. ViaSat’s four terminals all use the exact same modules (cards), so that required spares are kept to the minimum. The card set for one SATCOM channel consists of an Upconverter, Downconverter, Modem and Input/Output modules. The difference in the terminals is twofold; the chassis and the platform type. The chassis differ in the amount of UHF channels that can be accommodated in a given chassis. Dependent upon the chassis type, one to four full duplex channels can be accommodated. Platform type deals with how ruggedized the chassis is required to be. The RT-1828 and RT-1830 terminals are non-ruggedized and used in benign environments such as shore stations. The RT-1829 chassis is ruggedized for an at sea environment and the RT-1831 chassis is ruggedized for an aircraft environment.

 

RT-1828 and RT-1830 (P)/G UHF Satcom Terminals
PDF
RT-1828/30 data sheet view
The RT-1828(P)/G terminal is 9U high and will accommodate from one to four UHF SATCOM channels. The RT-1830(P)/G is a 3U high terminal and will accommodate only one UHF SATCOM channel.
RT-1829(P)/S UHF SatCom Terminal
PDF
RT-1829 data sheet view
Similar to the RT-1828, but ruggedized with shock mounts and the modules have stiffeners and the cards are conformal coated; Designed for shipboard applicatioins, and meets or exceeds the shock, vibe and other Department of Defense environmental requirements
RT-1831(P)/S UHF SatCom Terminal
PDF
RT-1829 data sheet view
Similar to the RT-1828, but ruggedized for airborne applications with a one-ATR form factor; will accomodate one or two UHF Satcom channels

Modems and Ancillary RF Equipment

With the ViaSat DAMA Orderwire Channel Controller Trainer/Simulator (DOCCT/S), you can develop, integrate, and train on UHF satellite communication equipment without the expense and time constraints associated with accessing live satellite channels.

A turnkey trainer and UHF SatCom/simulator for UHF satellite communications, DOCCT/S has the flexibility to address an entire range of UHF DAMA satellite communications equipment training, integration and mission rehearsal requirements.

 



DAMA Orderwire Channel Controller Trainer/Simulator (DOCCT/S)
PDF
DOCCT/S data sheet view
Replicates a Demand Assigned Multiple Access (DAMA) network control station and network terminal operations; Simulates a UHF transponder, including frequency translation, digital transponder bandlimiting and hardlimiting, and variable digital propagation delay, Doppler effects and thermal noise; Available in many configurations including 1-4 channels, orderwire encryption and RF capable

 

MD-1324A and MD-1324B UHF DAMA Satcom Modems
PDF
MD-1324A/B data sheet view
Provide a UHF SatCom capability for existing military half and full duplex radios; have been certified for SATCOM operation with over 10 different radios

 

 

 

SA-2768/U VHF/UHF broadband Radio Frequency Switch
PDF
SA-2768/U data sheet view
An automated priority switching matrix that allows five (5) high powered amplifiers to be used with up to ten (10) communications channels
Quad Diversity Combiner (QDC-100)
PDF
QDC-100 data sheet view
Advanced UHF SatCom combiner that provides up to 6dB signal-to-noise ratio (SNR) improvement for each of four (4) selected UHF SATCOM received signals from antenna-diplexer pairs

 

 

UHF SATCOM High Power Amplifiers (HPAs)


Shore, Shipboard and Airborne HPAs are available and range from 30 watts – 200 watts

 

 

Orderwire Encryption Board (OEB)


Daughter card that attaches to the Digital Signal Processing (DSP or Modem) module and provides encryption for the network handshaking
Telephony Interface Module (TIM)
PDF
TIM data sheet view
Daughter card that attaches to the I/O module and provides unencrypted MELP and CELP voice
Multiple UHF Interface Drawer (MUID)


Part of the DOCCT/S system, the MUID is a drawer that allows up to four terminals to be connected to a DOCCT/S system at RF
C-12480 Control Indicator
PDF
C-12480 data sheet view
Used in aircraft applications to control the MD-1324A modem and associated radio
UHF Satcom Up and Down Converter Modules


Two radio cards in the RT-18XX terminals that provide a SATCOM radio capability
Wideband Modulators (Transmit and Receive)


Provide the same Satcom capability as the Up and Down converters, and provide a VHF/UHF LOS capability
RF Components

ViaSat offers various RF components to support our SATCOM equipment including antennas, splitter combiner drawers (1X4), support pedestals, bandpass filters, LNA/Diplexers and DC injector drawers
Spare Components

ViaSat maintains spares boards (modules), power supplies and chassis for all of our equipment plus a large repair depot to support our various equipments

 

 

 

For more information on Government SatCom products, please contact gov.satcom@viasat.com.

Relevance: UHF SatCom equipment, UHF mobile satellite networking, SatCom terminals, UHF modems, and UHF SatCom simulators, Network gateway, RT-1828, RT-1830






 
Home » Support » Contact » Privacy
©1986-2007 ViaSat, Inc.All Rights Reserved.